In oil and gas show ,Particle impact drilling is 2% to 5% of the steel particles with drilling fluid into the underground,solids control,Email:ogem3@ogemsolidscontrol.com, Skype:maxiaoqiu16

2015.7.17 in Inner Mongolia hailar  oil gas show
At the show, many customers are interested in the particle impact system we developed, the system can reduce the wear and tear drill bit and drill pipe, greatly reduces the cost.This due to the need of environmental protection, we have the system, mud don't  fall to the ground system.
Particle impact drilling is 2% to 5% of the steel particles with drilling fluid into the underground, with more than 10 million times/min under the action of a jet of high frequency and more than 100 m/s high speed impact of rock, match the drill cuttings A tooth broken rock drilling high and new technology.At present, only the United States developed the particle drilling system, but also in the field test stage.Preliminary test shows that using particle impact drilling technology compared with conventional drilling rate of penetration increased 3 to 4 times.According to the foreign experts predict, the use of particle impact drilling technology in drilling a well hard interlayer can save drilling time by one-third.
OGEM Solids control with the  universities in petroleum  and cooperation, successfully completed the first particle impact system of manufacture and experiment site application.
Skype:maxiaoqiu16   Email:ogem3@ogemsolidscontrol.com  QQ；2051578726   Tel:15733797085 ,0315-2648099
Website:ru.tsajsy.com   Contace: Lisa Ma
2015.7.17 在内蒙古海拉尔展会上     石油天然气展会
    在展会上，很多客户对我们的粒子冲击系统感兴趣。这套系统可以减少钻头和钻杆的磨损，大大的减少成本。除此之外，由于人们的环境保护的关注，我们还可以提供泥浆不落地系统，以前人们都是在工地挖一个泥浆池，可是到工程结束的时候，泥浆池还留在工地，对环境有很大的影响。
   粒子冲击钻井是将2%至5%的钢质粒子随钻井液注入井下，在射流作用下以超过1000万次/分钟的高频率和大于100米/秒的高速撞击岩石，配合钻头切屑 齿破碎岩石的一项钻井高新技术。目前，仅美国研制出粒子钻井系统，但也处于现场试验阶段。初步试验表明，使用粒子冲击钻井技术较常规钻井机械钻速提高3倍 到4倍。据国外专家预测，使用粒子冲击钻井技术在硬夹层钻进一口井可节省1/3钻井时间。
澳捷石油机械与大学高校合作，首次成功完成了粒子冲击系统的制造并实验场地应用。
电话：15733797085 (马）  QQ：2051578726   Website:www.tsajsy.com 

Gold elephant is Mongolian totem

Particle impact system
Our booth

Comments

Post a Comment

Popular posts from this blog

Why mud system need mud agitator and mud mixer?

Image
  Why mud system need mud agitator and mud mixer? Mud mixers and mud agitator are used in surface mud systems to suspend solids and maintain a homogeneous mixture throughout the system. The mechanical agitator is driven by an explosion-proof motor connected to a gearbox that drives the impeller shaft. An impeller (turbine) converts mechanical power into fluid circulation or agitation. The aim is to obtain a homogeneous suspension of all solids. Agitator installation type: horizontal mud mixer Vertically mud agitator Welcome to contact me and sample can be sent for your reference! Many thanks and best regards, Lisa Ma               Mob/Whatsapp:+86-15733797085 Website:http://www.rlsykj.net/;http://www.ogemsolidscontrol.com/ Add:Tangshan City,Hebei province,China Email:ogem3@ogemsolidscontrol.com Company: Tangshan Ruilin Technology Co.,Ltd
Read more

wave vibrating screen and PMD shaker screen

Image
Tangshan RuiLin Technology Co.,Ltd  short for "   RuiLin Solids Control   " Product Application   These screens panel are constructed with two or three 304 or 316 stainless steel wire cloth layers with a steel backing plate combined together. Because of different mesh size, and steel backing plate, on the condition of using intensity, to get the best and most effective filtering area. specifications for shaker screens Model Brand & Model for Shaker Mesh Range Dimension   (Length x Width) Weight (kgs) AJ-01 DERRICK FLC2000 PWP 20-325 1053X697mm 4.8KGS AJ-02 DERRICK FLC500 SERIES PWP 20-325 1050X695mm 6.1KGS AJ-03  DERRICK FLC303 PWP 20-325 846X697mm 4.0KGS AJ-04  SWACO ALS-2 PWP 20-325 1212X1141mm 9.0KGS AJ-05 SWACO DFE 20-325 1225X720mm 7.0KGS Price of wave vibrating screen and PMD shaker screen Main Features High quality stainless steel More professional des
Read more

screw conveyor for drilling (auger)

Image
RuiLin solids control utilize customers designed and constructed screw conveyor as one part of drilling waste management system.  It is divided into a shaft and shaftless.It is used to transfer solid waste or slurry from solids control system (including the shale shaker , mud cleaner or decanter centrifuge ) to drilling waste systems for further treatment. The ordinary working process of screw conveyor The Screw Conveyor is designed to transport drilling waste from one site to another safely and efficiently. This is achieved by the useing of a scroll and impeller, which is rotated inside a trough by an electric motor. Drilling waste is fed into the screw conveyor and transported along by the rotating scroll. The waste is then offloaded by means of a chute when it reaches the end of the screw conveyor. The scroll is sealed inside the trough by a hinged metal lid which is bolted down for increased safety. Where large distances or turns are to be maneuvered.it may be necessary
Read more