supply Hdd mud recycling system equipment

supply Hdd mud recycling system equipment from China 
  The HDD drilling fluid recovery system is designed for horizontal directional drilling RIGS (HDDS). According to the needs of drilling mud, the HDD mud recovery system can include vibrating screen, demoulding cyclone separator, demoulding cyclone separator, decanter centrifuge, mud tank, mud mixer, mud gun, transport pump and so on. The screen size of the shaker will be based on the shaker's performance on mud flow and drilling mud separation in different mud requirements. 
  HDD mud recovery system working procedure 1. There is a drilling machine on each side of the drilling hole, and a set of vertical mud pump is set on the top of the drilling machine for feeding the vibrating screen. The shale shaker separates the drilling cuttings and the fluid portion falls through the sieve into the trap. 2. After 1 or 2 or 3 sets of desander cyclones, a set of centrifugal pumps will separate the desander Cyclong in the second stage, and the solid desander will discharge the vibrating screen or direct cutting box and the liquid flow desander will flow into the desander chamber. 3. After the desander, a certain number of desander cyclones will be placed for fine particle separation.
 The solids other than the desander will be discharged into the vibrating screen or cuttings box, and the fluid inside the desander will enter the desander room. 4. The mixing pump is installed on the anti-skid chute for drilling mud conveying, and the mud is injected into the mud hopper to remix the new mud with new chemicals. The mixing hopper can be installed on the top of the tank or on the slider upon customer's request.

Email:ogem3@ogemsolidscontrol.com
Whatsapp:8615733797085
Website:http://www.rlsykj.net
 

Comments

Post a Comment

Popular posts from this blog

Why mud system need mud agitator and mud mixer?

Image
  Why mud system need mud agitator and mud mixer? Mud mixers and mud agitator are used in surface mud systems to suspend solids and maintain a homogeneous mixture throughout the system. The mechanical agitator is driven by an explosion-proof motor connected to a gearbox that drives the impeller shaft. An impeller (turbine) converts mechanical power into fluid circulation or agitation. The aim is to obtain a homogeneous suspension of all solids. Agitator installation type: horizontal mud mixer Vertically mud agitator Welcome to contact me and sample can be sent for your reference! Many thanks and best regards, Lisa Ma               Mob/Whatsapp:+86-15733797085 Website:http://www.rlsykj.net/;http://www.ogemsolidscontrol.com/ Add:Tangshan City,Hebei province,China Email:ogem3@ogemsolidscontrol.com Company: Tangshan Ruilin Technology Co.,Ltd
Read more

wave vibrating screen and PMD shaker screen

Image
Tangshan RuiLin Technology Co.,Ltd  short for "   RuiLin Solids Control   " Product Application   These screens panel are constructed with two or three 304 or 316 stainless steel wire cloth layers with a steel backing plate combined together. Because of different mesh size, and steel backing plate, on the condition of using intensity, to get the best and most effective filtering area. specifications for shaker screens Model Brand & Model for Shaker Mesh Range Dimension   (Length x Width) Weight (kgs) AJ-01 DERRICK FLC2000 PWP 20-325 1053X697mm 4.8KGS AJ-02 DERRICK FLC500 SERIES PWP 20-325 1050X695mm 6.1KGS AJ-03  DERRICK FLC303 PWP 20-325 846X697mm 4.0KGS AJ-04  SWACO ALS-2 PWP 20-325 1212X1141mm 9.0KGS AJ-05 SWACO DFE 20-325 1225X720mm 7.0KGS Price of wave vibrating screen and PMD shaker screen Main Features High quality stainless steel More professional des
Read more

screw conveyor for drilling (auger)

Image
RuiLin solids control utilize customers designed and constructed screw conveyor as one part of drilling waste management system.  It is divided into a shaft and shaftless.It is used to transfer solid waste or slurry from solids control system (including the shale shaker , mud cleaner or decanter centrifuge ) to drilling waste systems for further treatment. The ordinary working process of screw conveyor The Screw Conveyor is designed to transport drilling waste from one site to another safely and efficiently. This is achieved by the useing of a scroll and impeller, which is rotated inside a trough by an electric motor. Drilling waste is fed into the screw conveyor and transported along by the rotating scroll. The waste is then offloaded by means of a chute when it reaches the end of the screw conveyor. The scroll is sealed inside the trough by a hinged metal lid which is bolted down for increased safety. Where large distances or turns are to be maneuvered.it may be necessary
Read more