RuiLin Solids Control

  Mud agitator is usually to stir slurry or mud to prevent drilling fluid solid particles depositing in the mud tank. Email:ogem3@ogemsolidscontrol.com Whatsapp:8615733797085 https://www.linkedin.com/in/lisa-ma-b292b4a7/

supply Hdd mud recycling system equipment from China  HDD mud recovery system    The HDD drilling fluid recovery system is designed for horizontal directional drilling RIGS (HDDS). According to the needs of drilling mud, the HDD mud recovery system can include vibrating screen, demoulding cyclone separator, demoulding cyclone separator, decanter centrifuge, mud tank, mud mixer, mud gun, transport pump and so on. The screen size of the shaker will be based on the shaker's performance on mud flow and drilling mud separation in different mud requirements.    HDD mud recovery system working procedure 1. There is a drilling machine on each side of the drilling hole, and a set of vertical mud pump is set on the top of the drilling machine for feeding the vibrating screen. The shale shaker separates the drilling cuttings and the fluid portion falls through the sieve into the trap. 2. After 1 or 2 or 3 sets of desander cyclones, a set of centrifugal pumps will separate the desander Cyclon

RuiLin Solids Control HDD - Horizontal directional through the mud recovery system Customer order of two sets of mud recovery system has shipment. Mainly include:shale shaker,mud cleaner,desander,screw pump,mud agitator,mud tank and etc. Email:ogem3@ogemsolidscontrol.com Skype:maxiaoqiu16 Whatsapp:8615733797085

  Mud cleaner is a combination of a desilter and/or desander mounted on a vibrator with a fine mesh screen. The mud is fed into the inlet of the hydrocyclone (desaner and/or desilter) to separate the particles, and the bottom flow enters the fine screen, where the larger particles than barite are discarded and discarded. Mud cleaning systems are installed in mud systems in most drilling operations. It is usually located in the same location as the mud trap in the mud tank.   The purpose of the mud cleaner is to remove drilling solids larger than SPARE. Prior to viscosity increase, mud cleaner can remove solids larger than 74-105 microns. Mud cleaner can effectively control the solid content of the weighted drilling fluid. Prevent differential pressure adhesion, adhesion sticking accident, reduce the thickness of filter cake on drill string and adhesion problem. Lisa Ma Email:ogem3@ogemsolidscontrol.com Whatsapp:8615733797085 https://www.linkedin.com/in/lisa-ma-b292b4a7/ W

  Shale shakers are considered to be an important part of drilling equipment. These are used not only in the upstream sector of the oil and gas industry, but also in other industries such as ore mining and cleaning, coal mining and cleaning. The shale vibrating screen is the first stage of the rig's solid phase control system and is considered to be the primary solid phase separation tool on the rig. It helps to remove most of the rock/shale, ie cuttings, from the drilling fluid. Drilling fluid is a liquid that is used to conveniently drill a hole in the earth's surface. This drilling fluid is an important part of the force generated in the oil well during oil construction operations. Since the drilling mud remains in contact with the wellbore throughout the drilling process, the operation cannot be completed without mud.     The shale vibrating shaker, also known as the drilling tank, is a vibrating device used in the drill solids control system to remove cuttings from t